And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.591
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.571
And
I accept adding "cowsay" to Additional Software
3.986
And
Additional Software is correctly configured for package "cowsay"
0.453
And
I shutdown Tails and wait for the computer to power off
4.003
And
I start Tails from USB drive "__internal" with network unplugged
32.423
And
I enable persistence
10.321
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
7.007
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.033
And
available upgrades have been checked
2.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.326
And
I can open the Additional Software configuration window from the notification
2.395
And
I shutdown Tails and wait for the computer to power off
17.405
And
I start Tails from USB drive "__internal" with network unplugged
32.271
And
I enable persistence
10.888
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.924
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.033
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.034