And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.704
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.920
And
I accept adding "cowsay" to Additional Software
4.014
And
Additional Software is correctly configured for package "cowsay"
0.593
And
I shutdown Tails and wait for the computer to power off
4.059
And
I start Tails from USB drive "__internal" with network unplugged
32.153
And
I enable persistence
10.706
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
7.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.030
And
the network is plugged
0.030
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.842
And
I can open the Additional Software configuration window from the notification
2.573
And
I shutdown Tails and wait for the computer to power off
17.808
And
I start Tails from USB drive "__internal" with network unplugged
32.705
And
I enable persistence
11.354
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.701
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.430
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051