And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.392
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.206
And
I accept adding "cowsay" to Additional Software
4.945
And
Additional Software is correctly configured for package "cowsay"
0.629
And
I shutdown Tails and wait for the computer to power off
3.947
And
I start Tails from USB drive "__internal" with network unplugged
33.039
And
I enable persistence
11.752
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
8.024
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.407
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.028
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.421
And
I can open the Additional Software configuration window from the notification
2.640
And
I shutdown Tails and wait for the computer to power off
12.907
And
I start Tails from USB drive "__internal" with network unplugged
34.250
And
I enable persistence
11.988
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
8.453
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065