And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.209
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.843
And
I accept adding "cowsay" to Additional Software
5.242
And
Additional Software is correctly configured for package "cowsay"
0.496
And
I shutdown Tails and wait for the computer to power off
2.533
And
I start Tails from USB drive "__internal" with network unplugged
32.544
And
I enable persistence
10.765
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.695
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.032
And
available upgrades have been checked
0.032
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.256
And
I can open the Additional Software configuration window from the notification
2.644
And
I shutdown Tails and wait for the computer to power off
13.234
And
I start Tails from USB drive "__internal" with network unplugged
33.282
And
I enable persistence
10.983
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
7.317
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048