And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.914
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.277
And
I accept adding "cowsay" to Additional Software
4.956
And
Additional Software is correctly configured for package "cowsay"
0.611
And
I shutdown Tails and wait for the computer to power off
4.144
And
I start Tails from USB drive "__internal" with network unplugged
33.131
And
I enable persistence
11.132
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
8.129
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.038
And
available upgrades have been checked
0.022
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.342
And
I can open the Additional Software configuration window from the notification
2.550
And
I shutdown Tails and wait for the computer to power off
17.848
And
I start Tails from USB drive "__internal" with network unplugged
35.236
And
I enable persistence
10.884
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.170
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047