And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.740
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.787
And
I accept adding "cowsay" to Additional Software
4.958
And
Additional Software is correctly configured for package "cowsay"
1.017
And
I shutdown Tails and wait for the computer to power off
3.846
And
I start Tails from USB drive "__internal" with network unplugged
33.060
And
I enable persistence
11.211
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
8.102
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.029
And
available upgrades have been checked
1.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.206
And
I can open the Additional Software configuration window from the notification
2.492
And
I shutdown Tails and wait for the computer to power off
12.610
And
I start Tails from USB drive "__internal" with network unplugged
33.593
And
I enable persistence
11.208
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.251
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.449
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073