And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.011
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.219
And
I accept adding "cowsay" to Additional Software
3.958
And
Additional Software is correctly configured for package "cowsay"
0.465
And
I shutdown Tails and wait for the computer to power off
3.953
And
I start Tails from USB drive "__internal" with network unplugged
32.412
And
I enable persistence
10.728
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
6.978
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.033
And
available upgrades have been checked
1.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.299
And
I can open the Additional Software configuration window from the notification
2.377
And
I shutdown Tails and wait for the computer to power off
12.508
And
I start Tails from USB drive "__internal" with network unplugged
31.317
And
I enable persistence
10.304
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.573
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059