And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.191
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.032
And
I accept adding "cowsay" to Additional Software
3.914
And
Additional Software is correctly configured for package "cowsay"
0.490
And
I shutdown Tails and wait for the computer to power off
2.552
And
I start Tails from USB drive "__internal" with network unplugged
32.522
And
I enable persistence
9.908
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.347
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.380
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.051
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.852
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
17.477
And
I start Tails from USB drive "__internal" with network unplugged
32.142
And
I enable persistence
10.297
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.816
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051