And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.686
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.139
And
I accept adding "cowsay" to Additional Software
4.917
And
Additional Software is correctly configured for package "cowsay"
0.687
And
I shutdown Tails and wait for the computer to power off
4.033
And
I start Tails from USB drive "__internal" with network unplugged
34.824
And
I enable persistence
12.691
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
8.934
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.023
And
available upgrades have been checked
0.032
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.824
And
I can open the Additional Software configuration window from the notification
2.473
And
I shutdown Tails and wait for the computer to power off
16.991
And
I start Tails from USB drive "__internal" with network unplugged
35.326
And
I enable persistence
12.225
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.642
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054