And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.670
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.604
And
I accept adding "cowsay" to Additional Software
5.073
And
Additional Software is correctly configured for package "cowsay"
0.663
And
I shutdown Tails and wait for the computer to power off
3.886
And
I start Tails from USB drive "__internal" with network unplugged
33.674
And
I enable persistence
11.881
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
7.628
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.265
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.072
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.886
And
I can open the Additional Software configuration window from the notification
2.531
And
I shutdown Tails and wait for the computer to power off
18.244
And
I start Tails from USB drive "__internal" with network unplugged
33.483
And
I enable persistence
11.088
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.721
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070