And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.072
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.149
And
I accept adding "cowsay" to Additional Software
4.963
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
3.892
And
I start Tails from USB drive "__internal" with network unplugged
33.866
And
I enable persistence
13.499
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
8.058
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.036
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.893
And
I can open the Additional Software configuration window from the notification
2.482
And
I shutdown Tails and wait for the computer to power off
18.143
And
I start Tails from USB drive "__internal" with network unplugged
34.707
And
I enable persistence
11.023
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.021
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061