And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.885
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.459
And
I accept adding "cowsay" to Additional Software
5.026
And
Additional Software is correctly configured for package "cowsay"
0.481
And
I shutdown Tails and wait for the computer to power off
2.526
And
I start Tails from USB drive "__internal" with network unplugged
32.290
And
I enable persistence
11.126
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
8.811
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.400
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.024
And
available upgrades have been checked
1.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.860
And
I can open the Additional Software configuration window from the notification
2.623
And
I shutdown Tails and wait for the computer to power off
14.292
And
I start Tails from USB drive "__internal" with network unplugged
32.916
And
I enable persistence
11.562
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.765
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045