And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.640
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.862
And
I accept adding "cowsay" to Additional Software
6.199
And
Additional Software is correctly configured for package "cowsay"
0.638
And
I shutdown Tails and wait for the computer to power off
8.308
And
I start Tails from USB drive "__internal" with network unplugged
39.660
And
I enable persistence
7.209
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.045
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.017
And
available upgrades have been checked
2.172
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.068
And
I can open the Additional Software configuration window from the notification
2.653
And
I shutdown Tails and wait for the computer to power off
17.530
And
I start Tails from USB drive "__internal" with network unplugged
39.202
And
I enable persistence
6.785
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.069
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082