And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.754
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.674
And
I accept adding "cowsay" to Additional Software
4.799
And
Additional Software is correctly configured for package "cowsay"
0.747
And
I shutdown Tails and wait for the computer to power off
8.379
And
I start Tails from USB drive "__internal" with network unplugged
39.350
And
I enable persistence
6.940
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.811
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.023
And
available upgrades have been checked
2.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.044
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
13.932
And
I start Tails from USB drive "__internal" with network unplugged
39.319
And
I enable persistence
6.665
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
12.103
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068