And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.296
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.542
And
I accept adding "cowsay" to Additional Software
3.679
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
8.165
And
I start Tails from USB drive "__internal" with network unplugged
38.720
And
I enable persistence
5.577
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
12.298
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.016
And
available upgrades have been checked
3.217
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.434
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
12.929
And
I start Tails from USB drive "__internal" with network unplugged
39.092
And
I enable persistence
7.178
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
13.938
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091