And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.377
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.759
And
I accept adding "cowsay" to Additional Software
3.729
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
4.132
And
I start Tails from USB drive "__internal" with network unplugged
37.747
And
I enable persistence
6.813
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.842
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.583
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.020
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.052
And
I can open the Additional Software configuration window from the notification
2.635
And
I shutdown Tails and wait for the computer to power off
22.582
And
I start Tails from USB drive "__internal" with network unplugged
36.958
And
I enable persistence
5.618
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.179
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087