And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.781
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.066
And
I accept adding "cowsay" to Additional Software
5.061
And
Additional Software is correctly configured for package "cowsay"
0.776
And
I shutdown Tails and wait for the computer to power off
8.017
And
I start Tails from USB drive "__internal" with network unplugged
38.877
And
I enable persistence
7.020
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.113
And
I log in to a new session
12.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.053
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.527
And
I can open the Additional Software configuration window from the notification
2.568
And
I shutdown Tails and wait for the computer to power off
17.843
And
I start Tails from USB drive "__internal" with network unplugged
39.664
And
I enable persistence
7.455
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.898
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.086
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064