And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.298
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.620
And
I accept adding "cowsay" to Additional Software
4.817
And
Additional Software is correctly configured for package "cowsay"
0.714
And
I shutdown Tails and wait for the computer to power off
8.054
And
I start Tails from USB drive "__internal" with network unplugged
37.622
And
I enable persistence
6.865
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
9.989
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.018
And
available upgrades have been checked
2.215
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.081
And
I can open the Additional Software configuration window from the notification
2.576
And
I shutdown Tails and wait for the computer to power off
22.906
And
I start Tails from USB drive "__internal" with network unplugged
37.151
And
I enable persistence
6.713
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.196
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.085
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080