And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.764
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.745
And
I accept adding "cowsay" to Additional Software
3.775
And
Additional Software is correctly configured for package "cowsay"
0.807
And
I shutdown Tails and wait for the computer to power off
6.946
And
I start Tails from USB drive "__internal" with network unplugged
37.119
And
I enable persistence
6.561
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.118
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.022
And
available upgrades have been checked
2.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.524
And
I can open the Additional Software configuration window from the notification
2.632
And
I shutdown Tails and wait for the computer to power off
13.463
And
I start Tails from USB drive "__internal" with network unplugged
37.207
And
I enable persistence
6.519
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.126
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086