And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.364
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.042
And
I accept adding "cowsay" to Additional Software
3.635
And
Additional Software is correctly configured for package "cowsay"
0.618
And
I shutdown Tails and wait for the computer to power off
4.275
And
I start Tails from USB drive "__internal" with network unplugged
35.991
And
I enable persistence
5.703
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
10.057
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.503
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.021
And
available upgrades have been checked
2.242
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.475
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
17.312
And
I start Tails from USB drive "__internal" with network unplugged
36.341
And
I enable persistence
6.786
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.280
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064