And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.266
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.032
And
I accept adding "cowsay" to Additional Software
4.973
And
Additional Software is correctly configured for package "cowsay"
0.716
And
I shutdown Tails and wait for the computer to power off
8.129
And
I start Tails from USB drive "__internal" with network unplugged
40.252
And
I enable persistence
7.078
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.553
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.028
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.585
And
I can open the Additional Software configuration window from the notification
2.620
And
I shutdown Tails and wait for the computer to power off
13.615
And
I start Tails from USB drive "__internal" with network unplugged
39.046
And
I enable persistence
7.394
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.636
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.653
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090