And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.410
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.801
And
I accept adding "cowsay" to Additional Software
5.112
And
Additional Software is correctly configured for package "cowsay"
0.649
And
I shutdown Tails and wait for the computer to power off
4.360
And
I start Tails from USB drive "__internal" with network unplugged
36.950
And
I enable persistence
6.509
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
11.135
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
2.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.548
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
17.679
And
I start Tails from USB drive "__internal" with network unplugged
37.682
And
I enable persistence
5.728
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056