And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.152
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.133
And
I accept adding "cowsay" to Additional Software
5.047
And
Additional Software is correctly configured for package "cowsay"
0.827
And
I shutdown Tails and wait for the computer to power off
4.246
And
I start Tails from USB drive "__internal" with network unplugged
38.928
And
I enable persistence
6.607
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.307
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
3.198
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.409
And
I can open the Additional Software configuration window from the notification
2.525
And
I shutdown Tails and wait for the computer to power off
17.585
And
I start Tails from USB drive "__internal" with network unplugged
38.010
And
I enable persistence
6.474
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.838
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078