And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.185
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.796
And
I accept adding "cowsay" to Additional Software
5.265
And
Additional Software is correctly configured for package "cowsay"
0.675
And
I shutdown Tails and wait for the computer to power off
4.177
And
I start Tails from USB drive "__internal" with network unplugged
38.087
And
I enable persistence
6.752
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.934
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.317
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.021
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.997
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
17.437
And
I start Tails from USB drive "__internal" with network unplugged
38.821
And
I enable persistence
6.772
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.714
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.265
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.090
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098