And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.285
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.539
And
I accept adding "cowsay" to Additional Software
4.845
And
Additional Software is correctly configured for package "cowsay"
0.765
And
I shutdown Tails and wait for the computer to power off
7.900
And
I start Tails from USB drive "__internal" with network unplugged
37.497
And
I enable persistence
5.973
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
10.583
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.247
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.020
And
available upgrades have been checked
1.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.527
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
8.605
And
I start Tails from USB drive "__internal" with network unplugged
37.491
And
I enable persistence
6.780
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.387
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076