And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.264
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.952
And
I accept adding "cowsay" to Additional Software
4.958
And
Additional Software is correctly configured for package "cowsay"
0.718
And
I shutdown Tails and wait for the computer to power off
8.748
And
I start Tails from USB drive "__internal" with network unplugged
41.030
And
I enable persistence
6.975
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
11.939
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.269
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.019
And
available upgrades have been checked
2.234
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.048
And
I can open the Additional Software configuration window from the notification
2.550
And
I shutdown Tails and wait for the computer to power off
22.374
And
I start Tails from USB drive "__internal" with network unplugged
40.423
And
I enable persistence
8.306
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.214
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.690
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081