And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.046
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.387
And
I accept adding "cowsay" to Additional Software
3.689
And
Additional Software is correctly configured for package "cowsay"
0.691
And
I shutdown Tails and wait for the computer to power off
7.929
And
I start Tails from USB drive "__internal" with network unplugged
36.880
And
I enable persistence
6.436
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.743
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.014
And
available upgrades have been checked
2.180
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.401
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
22.605
And
I start Tails from USB drive "__internal" with network unplugged
37.131
And
I enable persistence
5.831
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.649
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.518
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104