And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.151
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.413
And
I accept adding "cowsay" to Additional Software
3.692
And
Additional Software is correctly configured for package "cowsay"
0.579
And
I shutdown Tails and wait for the computer to power off
2.845
And
I start Tails from USB drive "__internal" with network unplugged
36.266
And
I enable persistence
5.525
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.273
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.013
And
available upgrades have been checked
1.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.481
And
I can open the Additional Software configuration window from the notification
2.529
And
I shutdown Tails and wait for the computer to power off
22.230
And
I start Tails from USB drive "__internal" with network unplugged
36.089
And
I enable persistence
5.818
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060