And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.696
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.431
And
I accept adding "cowsay" to Additional Software
3.705
And
Additional Software is correctly configured for package "cowsay"
0.596
And
I shutdown Tails and wait for the computer to power off
7.839
And
I start Tails from USB drive "__internal" with network unplugged
35.042
And
I enable persistence
5.555
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.314
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.019
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.468
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
17.073
And
I start Tails from USB drive "__internal" with network unplugged
36.477
And
I enable persistence
5.508
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.111
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058