And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.561
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.505
And
I accept adding "cowsay" to Additional Software
4.883
And
Additional Software is correctly configured for package "cowsay"
0.651
And
I shutdown Tails and wait for the computer to power off
8.709
And
I start Tails from USB drive "__internal" with network unplugged
40.070
And
I enable persistence
6.670
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
11.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.020
And
available upgrades have been checked
2.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.470
And
I can open the Additional Software configuration window from the notification
2.618
And
I shutdown Tails and wait for the computer to power off
22.722
And
I start Tails from USB drive "__internal" with network unplugged
39.536
And
I enable persistence
7.228
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.816
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.098
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065