And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.579
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.334
And
I accept adding "cowsay" to Additional Software
4.835
And
Additional Software is correctly configured for package "cowsay"
0.748
And
I shutdown Tails and wait for the computer to power off
8.264
And
I start Tails from USB drive "__internal" with network unplugged
40.106
And
I enable persistence
6.817
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.761
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.596
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.031
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.043
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
23.146
And
I start Tails from USB drive "__internal" with network unplugged
39.733
And
I enable persistence
7.630
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.986
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075