And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.135
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.855
And
I accept adding "cowsay" to Additional Software
5.042
And
Additional Software is correctly configured for package "cowsay"
0.697
And
I shutdown Tails and wait for the computer to power off
8.027
And
I start Tails from USB drive "__internal" with network unplugged
38.192
And
I enable persistence
6.703
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
11.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.016
And
available upgrades have been checked
1.149
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.638
And
I can open the Additional Software configuration window from the notification
2.908
And
I shutdown Tails and wait for the computer to power off
17.811
And
I start Tails from USB drive "__internal" with network unplugged
38.399
And
I enable persistence
8.161
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.040
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.075
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079