And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.251
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
40.264
And
I accept adding "cowsay" to Additional Software
3.769
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
7.955
And
I start Tails from USB drive "__internal" with network unplugged
37.371
And
I enable persistence
6.781
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.342
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.021
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.733
And
I can open the Additional Software configuration window from the notification
2.597
And
I shutdown Tails and wait for the computer to power off
17.112
And
I start Tails from USB drive "__internal" with network unplugged
36.956
And
I enable persistence
6.813
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.775
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.523
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.075
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070