And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.989
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.256
And
I accept adding "cowsay" to Additional Software
3.656
And
Additional Software is correctly configured for package "cowsay"
0.650
And
I shutdown Tails and wait for the computer to power off
4.212
And
I start Tails from USB drive "__internal" with network unplugged
35.877
And
I enable persistence
5.687
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
9.363
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.543
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.014
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.522
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
17.268
And
I start Tails from USB drive "__internal" with network unplugged
36.233
And
I enable persistence
5.395
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.144
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.488
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058