And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.317
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.627
And
I accept adding "cowsay" to Additional Software
5.354
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
8.625
And
I start Tails from USB drive "__internal" with network unplugged
39.808
And
I enable persistence
6.893
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
12.619
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.015
And
available upgrades have been checked
1.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.568
And
I can open the Additional Software configuration window from the notification
2.628
And
I shutdown Tails and wait for the computer to power off
18.024
And
I start Tails from USB drive "__internal" with network unplugged
40.345
And
I enable persistence
7.307
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.824
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075