And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.142
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.195
And
I accept adding "cowsay" to Additional Software
5.071
And
Additional Software is correctly configured for package "cowsay"
0.715
And
I shutdown Tails and wait for the computer to power off
8.044
And
I start Tails from USB drive "__internal" with network unplugged
40.088
And
I enable persistence
7.006
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.029
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.015
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.148
And
I can open the Additional Software configuration window from the notification
2.679
And
I shutdown Tails and wait for the computer to power off
18.247
And
I start Tails from USB drive "__internal" with network unplugged
39.636
And
I enable persistence
6.889
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.646
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069