And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.707
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.362
And
I accept adding "cowsay" to Additional Software
3.608
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
4.074
And
I start Tails from USB drive "__internal" with network unplugged
37.517
And
I enable persistence
6.537
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.738
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.013
And
available upgrades have been checked
1.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.609
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
17.326
And
I start Tails from USB drive "__internal" with network unplugged
36.674
And
I enable persistence
5.523
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.881
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063