And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.783
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.399
And
I accept adding "cowsay" to Additional Software
4.990
And
Additional Software is correctly configured for package "cowsay"
0.797
And
I shutdown Tails and wait for the computer to power off
8.330
And
I start Tails from USB drive "__internal" with network unplugged
43.288
And
I enable persistence
6.871
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
10.675
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.025
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.491
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
21.938
And
I start Tails from USB drive "__internal" with network unplugged
39.557
And
I enable persistence
7.116
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.952
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.273
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099