And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.014
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.719
And
I accept adding "cowsay" to Additional Software
4.991
And
Additional Software is correctly configured for package "cowsay"
0.721
And
I shutdown Tails and wait for the computer to power off
8.451
And
I start Tails from USB drive "__internal" with network unplugged
39.280
And
I enable persistence
6.897
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.483
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.260
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.021
And
available upgrades have been checked
2.170
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.565
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
17.690
And
I start Tails from USB drive "__internal" with network unplugged
39.254
And
I enable persistence
6.692
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.006
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.073
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064