And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:47.914
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.029
And
I accept adding "cowsay" to Additional Software
4.886
And
Additional Software is correctly configured for package "cowsay"
0.638
And
I shutdown Tails and wait for the computer to power off
8.426
And
I start Tails from USB drive "__internal" with network unplugged
37.482
And
I enable persistence
6.548
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
9.716
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.276
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.029
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.044
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
17.690
And
I start Tails from USB drive "__internal" with network unplugged
37.584
And
I enable persistence
6.560
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
9.517
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059