And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.913
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.088
And
I accept adding "cowsay" to Additional Software
4.846
And
Additional Software is correctly configured for package "cowsay"
0.598
And
I shutdown Tails and wait for the computer to power off
4.075
And
I start Tails from USB drive "__internal" with network unplugged
37.396
And
I enable persistence
6.966
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
9.696
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.584
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.021
And
available upgrades have been checked
1.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.503
And
I can open the Additional Software configuration window from the notification
2.534
And
I shutdown Tails and wait for the computer to power off
17.395
And
I start Tails from USB drive "__internal" with network unplugged
37.581
And
I enable persistence
6.565
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.678
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.353
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048