And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.302
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.952
And
I accept adding "cowsay" to Additional Software
4.871
And
Additional Software is correctly configured for package "cowsay"
0.685
And
I shutdown Tails and wait for the computer to power off
4.395
And
I start Tails from USB drive "__internal" with network unplugged
38.951
And
I enable persistence
7.344
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
9.712
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.019
And
available upgrades have been checked
2.243
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.024
And
I can open the Additional Software configuration window from the notification
2.616
And
I shutdown Tails and wait for the computer to power off
17.561
And
I start Tails from USB drive "__internal" with network unplugged
38.451
And
I enable persistence
6.652
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
9.200
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077