And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.524
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.458
And
I accept adding "cowsay" to Additional Software
6.249
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
8.262
And
I start Tails from USB drive "__internal" with network unplugged
40.478
And
I enable persistence
7.184
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
11.719
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.023
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.217
And
I can open the Additional Software configuration window from the notification
2.693
And
I shutdown Tails and wait for the computer to power off
22.235
And
I start Tails from USB drive "__internal" with network unplugged
41.003
And
I enable persistence
6.626
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.260
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.321
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055