And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.604
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.990
And
I accept adding "cowsay" to Additional Software
5.247
And
Additional Software is correctly configured for package "cowsay"
0.852
And
I shutdown Tails and wait for the computer to power off
8.587
And
I start Tails from USB drive "__internal" with network unplugged
39.877
And
I enable persistence
7.054
And
I configure APT to prefer an old version of cowsay
0.017
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
12.029
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.299
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.016
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.145
And
I can open the Additional Software configuration window from the notification
3.192
And
I shutdown Tails and wait for the computer to power off
14.028
And
I start Tails from USB drive "__internal" with network unplugged
40.135
And
I enable persistence
7.119
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.104
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.269
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085