And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.334
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.554
And
I accept adding "cowsay" to Additional Software
4.832
And
Additional Software is correctly configured for package "cowsay"
0.665
And
I shutdown Tails and wait for the computer to power off
7.987
And
I start Tails from USB drive "__internal" with network unplugged
37.926
And
I enable persistence
5.844
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
10.093
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.014
And
available upgrades have been checked
2.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.541
And
I can open the Additional Software configuration window from the notification
2.636
And
I shutdown Tails and wait for the computer to power off
17.584
And
I start Tails from USB drive "__internal" with network unplugged
38.470
And
I enable persistence
6.527
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.730
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064