And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.885
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.069
And
I accept adding "cowsay" to Additional Software
5.082
And
Additional Software is correctly configured for package "cowsay"
0.597
And
I shutdown Tails and wait for the computer to power off
7.898
And
I start Tails from USB drive "__internal" with network unplugged
37.393
And
I enable persistence
6.721
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.348
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.019
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.626
And
I can open the Additional Software configuration window from the notification
2.489
And
I shutdown Tails and wait for the computer to power off
17.557
And
I start Tails from USB drive "__internal" with network unplugged
37.288
And
I enable persistence
6.859
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
10.611
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059