And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.605
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.508
And
I accept adding "cowsay" to Additional Software
3.696
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
7.976
And
I start Tails from USB drive "__internal" with network unplugged
36.372
And
I enable persistence
6.266
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.054
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.013
And
available upgrades have been checked
1.124
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.458
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
12.990
And
I start Tails from USB drive "__internal" with network unplugged
36.194
And
I enable persistence
5.617
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075