And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.308
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.761
And
I accept adding "cowsay" to Additional Software
5.123
And
Additional Software is correctly configured for package "cowsay"
0.721
And
I shutdown Tails and wait for the computer to power off
4.134
And
I start Tails from USB drive "__internal" with network unplugged
38.411
And
I enable persistence
6.681
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.705
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.013
And
available upgrades have been checked
2.201
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.028
And
I can open the Additional Software configuration window from the notification
2.618
And
I shutdown Tails and wait for the computer to power off
17.356
And
I start Tails from USB drive "__internal" with network unplugged
38.534
And
I enable persistence
6.922
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.985
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073