And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.098
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.635
And
I accept adding "cowsay" to Additional Software
5.169
And
Additional Software is correctly configured for package "cowsay"
0.964
And
I shutdown Tails and wait for the computer to power off
8.080
And
I start Tails from USB drive "__internal" with network unplugged
38.221
And
I enable persistence
6.358
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.015
And
available upgrades have been checked
2.168
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.438
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
17.535
And
I start Tails from USB drive "__internal" with network unplugged
38.125
And
I enable persistence
6.689
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.893
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.276
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056