And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.584
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.927
And
I accept adding "cowsay" to Additional Software
5.125
And
Additional Software is correctly configured for package "cowsay"
0.824
And
I shutdown Tails and wait for the computer to power off
4.700
And
I start Tails from USB drive "__internal" with network unplugged
39.054
And
I enable persistence
7.209
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
10.055
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.016
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.502
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
22.241
And
I start Tails from USB drive "__internal" with network unplugged
38.651
And
I enable persistence
7.162
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.387
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087